‘N’ housing system section

DA6-D/N

It’s an analog audio stereo distributor, 1 input 6 outputs. The front panel holds two level adjustments, power monitor LED and two VU meters with peak hold.

The discrete audio channels back panel holds the stereo balanced input and six stereo balanced outs.

Downloadable documents require Adobe Reader. Click on this button to download the latest version of the Reader.

CDN2/N

It’s an analog audio stereo amplifier 1 input 6 outputs. The front panel holds two level gains, two step selector adjustments (0-30dB gain) and a power monitor LED.

The discrete audio channels back panel holds the stereo balanced input and six stereo power outs.

1KHz/N

1 KHz analog audio stereo generator.

The back panel holds the balanced audio output.

CM-A/N

It’s an analog audio switch/changeover, with power LED and activity LEDs on the front panel and main/spare discrete audio I/O on the back panel.

DVEC6B/N

This is an analog video equalizer/distributor 1x6 with by-pass, clamp and hi hum rejection. Designed to recover the line loss signal, it allows a discrete frequency equalization from the front panel. A microprocessor analyzes output against input signals and switches to by-pass if not compliant to reference parameters. Reset button on the front panel.

DDA16/N

This is a 1x10 AES-EBU digital audio distributor, with two analog balanced outputs (24 bit D/A). The input signal is regenerated and amplified to the outputs. The front panel shows a power, 48KHz and ‘Error’ LEDs. The back panel holds the discrete digital audio I/O and the two channel analog audio outs.

DDV16C/N

Digital video distributor 1x6+1, for serial signal according to SMPTE259 and CCIR656, 75Ohm-800mV. The six outputs are relocked. A converted analog PAL output is provided for a colour monitor.

The back panel holds the discrete I/O connections.

DHDV16/N

Multi rate digital 1x6 video distributor. It supports HD SDI, SD SDI, DVB-ASI. SD and HD SDI are automatically detected and relocked. An automatic cable compensation allows line lengths up to 350m (SD SDI) or up to 140m (HD SDI). The back panel holds the discrete I/O.

EMB-A/N

Analog embedder inserts four analog audio inputs (converted in two AES-EBU channels) into a SDI (SD or HD) video signal, involving one only of the four audio groups in the video stream. The group is selected during the installation.

The back panel holds the SDI I/O and the balanced audio inputs.

EMB-D/N

The digital embedder inserts two AES-EBU audio streams into a SDI (SD or HD) video signal, involving one only of the four audio groups in the video stream. The group is selected during the installation.

SMPTE 259M and 292M compliant.

The back panel holds the SDI I/O and the two AES-EBU inputs.

DE-EMB-A/N

Extracts four analog channels from a group of two AES-EBU, embedded on a video SDI (SD or HD) stream. The group is selected during the installation.

SMPTE 259M and 292M compliant.

The back panel holds the SDI I/O and the four analog balanced audio outs.

DE-EMB-D/N

Extracts two AES-EBU audio streams from one group of four embedded on a video SDI (SD or HD) stream. This group is selected during the installation.

SMPTE 259M and 292M compliant.

The back panel holds the SDI I/O and the two AES-EBU digital outs.

RK3-16M/N universal ‘N’ series 3RU housing/shelf

It can hold up to 12 ‘N’ series modules with their back panels and two PWS-150/N power supply units. The power is delivered by a 8 slots or 16 slots bus, depending on the factory configuration. Both buses can be furnished as spare parts.

The open back panel holds the modules back panels allowing the mix of different functions in the same housing system.

Blank panels are available for the empty slots.

RK1-2M/N universal ‘N’ series 1RU housing/shelf

It can hold two ‘N’ series modules with their back panels and two PWT/24/N power supply units.

POWER SUPPLY MODULES

PWS-150/N    (3RU housing shelf)

PWT/24/N       (1RU housing shelf)

These are AC to DC power supply units designed to fit the ‘N’ series housings. They can work in pair, so a PWS can be hot swapped without affecting the operations. No back panels are required.